|
ZJS series in linear manually cleaning filters |
Product Des cription
ZJS series of on-line manual cleaning filters applied to the various water systems, pipelines and industrial process water recycling system, Special 24-hour continuous operation of the non-stop system to ensure that the Department "br> reunification safe and reliable operation, is a simple and efficient filters, which are widely used in petroleum, chemicals, metallurgy, environmental protection, mining, pharmaceutical, food, paper and other fields.
The series filter cleaning mode two categories : the brush-and diversion. |
| Label Model |
|
|
Principle and structural features
ZJS series Brush manual cleaning filter is a filter and clean the simultaneous realization of the filter device from carbon steel or stainless steel cylinder, stainless steel brush, stainless steel strainer wedge pressure and "br> sewage valve components. Fluid through the filter, was stopped impurities contained in the cartridge wall, when import and export have a certain pressure manometer. stands demolished without filters, as long as the open sewage valve Light "br> Light rotating handle, Brush the cartridge so that the inner wall of circular motion and impurities from the cartridge smooth on the inside wall of brush, with the direction of water discharge, the cleaning process can be completed.
ZJS series lead-cleaning filters manually principle see ZJDP self-cleaning filter parts. |
Structure
 ZJSY-Brush - line manual cleaning filters |
 ZJSF-Brush online manual cleaning filters |
 ZJSP I-filters |
 (DN ≤ 125) ZJSL online manual-cleaning filters |
 (DN ≥ 150) ZJSL online manual-cleaning filters |
 ZJSC III-line manual-cleaning filters |
 ZJSP II filters |
 ZJSC II compound online manual cleaning filters |
|
| |
|
|
|
| |
Note
ZJS-line manual-cleaning filters can be horizontal or vertical installation, to be installed on the hull of the direction of the arrow must be consistent with the direction of water flow. |
|
Notes orders
(1), the company is producing ZJS series of filters, seating rating for 0.6,1.0,1.6, 2.5,4.0,6.3MPa using Ministry of Chemical Industry HG20592 standards, Users "br> Using GB, JB, ANSI and JIS standard flanges, etc., please specify in the contract.
(2), which filters type material Note : E-20, carbon steel, S-1Cr18Ni9Ti/0Cr18Ni9, R-316L; For special materials, Please specify in the contract.
(3), optional filters, users correct locations writing models, specifications and mode of operation, providing the following conditions :
A maximum working pressure
b maximum working temperature
c filtering accuracy
d MEDIA name, concentration, Viscosity e Contamination ratio, impurity size
(4), non-standard products. Users can provide drawings and technical conditions for the design and manufacture. |
|
|
