|
SG series of mixed-jet-stirred mixing system |
SG series of mixed cement injection system is a mixed and turnover for the efficient mixing liquid jet pump, its biggest advantage is that : reliable, simple, no maintenance, environmental protection, energy saving.
SG series of mixed cement injection system applicable range, it can be said that as long as the pump with liquid transmission overturned, on the use of such mixed Jet Mixing System, which is used for packaging, storage tank and the tank and, as blending, and the acid-base reaction process, as an ideal mixing equipment. |
Principle from the mixed jet emitted from the nozzle flow with the high-speed cone-shaped entrance to the low pressure formed, so from the tank and set an adsorption flow, speed up the ejector with a high degree of Eddy, have a mixture of internal mixing.
Mixed jet exit, the mixed speed was partially converted to pressure so from the Chinese jet emitted by the mixture into a conical shape proliferation, and to bring the surrounding liquid, the liquid mixture to Tank, China and the purpose. Specifications : liquid-liquid mixing uniformity coefficient × x-2 a ≤ 7.5%, the maximum dispersion from 5 to 20 μ m.
If one or several SG series jet with mixed correctly, the tank is producing a three-dimensional jet, It's the whole shell material mixing, and not have a drama out of the campaign.
Mixed with the ejector pump ISHG chemical, thruster is mixed SG jet mixing system (the process flow chart below).
Note : Top Level system is no automatic level control device, and the upper nozzle chain, When the liquid level below the warning line at the automatic level control device send signals so that the upper nozzle to stop working. |
|
Label Model
|
|
|
Product Installation
SG Series mixer jet should, as far as possible installed in the deepest position, Thus, the less liquid circumstances can guarantee valid mixed results.
For some easily created a bubble of liquid, you can make above the surface mixed with a jet to 2m, produce bubbles can be avoided.
Charts show SG series jet mixing tank installed in the general location locations reference by users. |
|
|
Selection "br> SG series of mixed cement injection system model and size, the arrangement is very clever, for the general requirements of the technology, we can find an ideal equipment, according to the following power curve, Overall, you will be satisfied with the answer.
Example :
DN3600mm diameter cans and jars Height : 8m overturned pump flow : 10m3/h into the mixer pressure : 4Kg/cm2 number of turns : 0.5h/ time "br> Solution : Mixed jet mixer system" br> According to the curve : Tank jet mixer models to be elected SG-4
1, orders, must correctly identify products models, materials, ensure that their performance.
2, the flange JB/T81-94 PN1.0 standards, such as change orders, the standard should be annotated.
3, medium density, viscosity and temperature.
4, Tank height, diameter and liquid level data on the threshold.
5, the component for media production and related parameters. |
|
